The most accessible  Shure Rack-mount Wireless Guitar System with simple setup and an intuitive interface for performance you can trust in. Rack-mount wireless system for guitarists and bassists with analog transmission. What receiver comes with the SM Wireless Rack-mount Guitar System?  The SM Wireless Rack-mount Guitar System comes with the Analog Wireless Rack-mount Receiver BLX4R that provides improved linearity and frequency response. The receiver BLX4R is ready to perform right out of the box and is the clearest choice for performers who wish to unplug from the wire. Is a rack mount kit included Yes, the box contains everything you need for rack mounting. How many musicians can use this system simultaneously? Up to 12 compatible channels per group with group and channel scan for easy set-up. Is the setup really that easy? Yes, with one button you can start the group and channel scan, which gives you the best open frequency . Adjust the transmitter to the same channel and you’re ready to go. What does Linearity mean? The proportion between input signal of the transmitter and output signal of the receiver is always constant. Industry-standard professional microphones for daily touring, club and studio performances. WA302

• Cable, instrument, 2.5 foot (. 75 m)
• 4-pin mini connector (TA4F) to 1/4-inch connector

BLX1 Bodypack Transmitter

• Power and battery status LED
• Adjustable gain control
• Quick and easy frequency matching
• AA batteries (included) provide up to 14 hours of continuous use
• 100 m (300 ft. ) operating range (line of sight)

Receiver BLX4R

• One-touch QuickScan selection quickly locates the best open frequency (in case of interference)
• Up to 12 compatible systems per frequency band (region-dependent)
• XLR and ¼ output connectors
• Two-color audio status indicator LED    
  
  • Green:  Normal audio levels
  • Red:  Excessive audio levels (overload/clipping)
• Adjustable output level 
• Removable antennas for quick antenna distribution
• LC Display with detailed RF and audio metering
• Rack mount kit included

Furnished Accessories

• RACK MOUNT BRACKET, part number: 53A8611
• LONG RACK MOUNT BRACKET, part number: 53A8612
• LINK BRACKET, part number: 53B8443
• HARDWARE KIT, part number: 90AZ8100
• Swivel adater, part number: 90F4046
• Thread adapter, part number: 31B1856
• 2x, ANTENNA/BNC, 1/4 WAVE, part number: 95A8699 
• 2x, ADAPTER, BULKHEAD, BNC, part number: 95A8994
• BAG  VINYL, ZIPPERED, part number: 95B2313
• 2x, CABLE, BNC, 22 in. , part number: 95K2035
• Power supply PS23

Date tehnice: System technical specifications

• Compatible systems per frequency band (up to): 12
• Selectable frequencies: Up to 150
• Auto Setup Features: QuickScan : Finds group with most compatible frequencies and sets to best frequency
• Audio Reference Companding: No
• Included Antennas: BLX4, BLX88: Internal, BLX4R: Detachable
• Antenna Options: No
• Receiver Network Ability: No
• PC Control: No
• Rack Hardware: URT2 (not included), Rack mount brackets (only with rackable/BLX-R Sets)
• Case: Included Only with BLX4 Sets
• Transmitter Display: LED
• Receiver Display: BLX4, BLX88: LED, BLX4R: High-resolution LCD screen
• Battery, Endurance: 2AA, up to 14h
• Environment: Daily Touring

Further Technical Specs

• Operating Range: 91 m ( line of sight - actual range depends on RF signal absorption, reflection and interference)
• Available Frequencies: Between 524–865 MHz (available frequencies depend on applicable regulations in country where system used)
• Audio Range: 50–15,000 Hz (dependent on microphone type)
• Transmitter RF Output Power: 10 mW, typical (varies by region)
• Audio Output Connector: XLR and 1/4" (6.3 mm)  unbalanced Maximum Output Level: -27 dBV (XLR, mic level), -13 dBV (1/4")
• Battery Life: Up to 14 hours
• Dynamic Range: 100 dB A-weighted
• System Distortion: 0.5% THD typical (ref. +/- 38 kHz deviation,  1 kHz tone)
• Operating Temperature Range: -18°C (0°F) – +50°C (122°F)
• Power Requirements: BLX1, BLX2: 2 AA alkaline or rechargeable batteries
• BLX4R: 12–15 V DC @ 260 mA, supplied by external power supply (tip positive)

Component Specifications:BLX4R Receiver

• Output Impedance:
• - XLR connector: 200 O
• - 6.35 mm (1/4") connector: 50 O
• Audio Output Level, Ref. ±33 kHz deviation with 1 kHz tone:
• - XLR connector: –20.5 dBV (into 100 kO load)
• - 6.35 mm (1/4") connector: –13 dBV (into 100 kO load)
• RF Sensitivity: -105 dBm for 12 dB SINAD, typical
• Image Rejection: >50 dB, typical
• Dimensions: 50 mm X 198 mm X 163 mm H x W x D
• Weight, without antennas: 998 g
• Housing: Molded ABS, steel
• Power Requirements: 12–15 V DC @ 260 mA, supplied by external power supply (tip positive)

BLX1 Bodypack Transmitter

• Audio Input Level:    
  
  • - gain max: -16 dBV maximum
  • - gain min (0 dB): +10 dBV maximum
• Gain Adjustment Range: 26 dB
• Input Impedance: 1 M
• RF Transmitter Output: 10 mW, typical, varies by region
• Dimensions: 110 mm x 64 mm x 21 mm (H x W x D)
• Weight: 75 g, without batteries
• Housing: Molded ABS
• Power Requirements: 2 LR6 AA batteries, 1.5 V, alkaline
• Battery Life: up to 14 hours (alkaline)

Denumiri similare la Microfon Shure BLX14R/WA302: BLX 14 R WA 302, BLX14RWA302, BLX 14R/WA302, BLX14R/WA 302

Galerie