Shure SM86
Shure SM86
de la 717,75 RON
3 oferte
Oferte pentru produsul Shure SM86
Ofertele pentru produsul
Caracteristici, descrierea produsului - Shure SM86
Galerie - Shure SM86
Evoluţie preţ
Puteti obtine informatii privind evolutia pretului
Alerta pret
Serviciul Alerta pret va anunta daca pretul produsului ales scade sub suma precizata.
Pretul minim actual al produsului: 717,75 RON
Alte produse cu caracteristici asemănătoare
Alte produse Shure: Shure Microfon
Descrierea produsului
| Tip | Condensator |
| Frecvență minimă preluată | 50 Hz |
| Frecvență maximă preluată | 18000 Hz |
| Caracteristică | Cardioid |
| Conectori | XLR |
Ați găsit greşeli în descrierea produsului? Vă rugăm să ne trimiteți o notificare!
Legendarul microfon Shure SM86 este ideal pentru a capta si reda vocea la o calitate de studio, cu rezistenta unui microfon dinamic. Capsula polarizata cardioida capteaza sunetul doar frontal si lateral nereceptand sursele sonore din spatele acestuia, permitand astfel folosirea sa in aplicatii live limitand astfel efectul de Feedback (microfonie).
A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The built-in three-point shock mount minimizes handling noise, and a two-stage pop filter reduces wind and breath \\"pop\\" noise.
Date tehnice: Transducer Type Condenser (electret bias) Frequency Response 50 to 18,000 Hz Polar Pattern Cardioid Output Impedance 150 Ohms at 1 kHz Recommended minimum load impedance: 600 Ohms Sensitivity (at 1,000 Hz) Open Circuit Voltage: -50 dBV/Pa (3.15 mV) (1 Pa = 94 dB SPL) Output Clipping Level 1000 Ohm Load at 1,000 Hz: +3 dBV (1.41 V) Maximum SPL (at 1,000 Hz) 1000 ohm load (1% THD): 147 dB Self-Noise 23 dB typical, A-weighted Dynamic Range (1000 ohms) 124 dB (maximum SPL to A-weighted noise level Signal-to-Noise Ratio 71 dB at 94 dB SPL (IEC 651)* *S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted. Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector. Power Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3 Current Drain: 5.2 mA Connector Three-pin (XLR) professional audio Case Dark gray enamel-painted steel with matte-finished silver colored steel grille Dimensions See User Guide Net Weight Net: 278 grams (9.8 oz) Environmental Conditions Operating: -18 degrees to 60 degrees C (0 degrees to 135 degrees F) (relative humidity >90%) Storage: -29 degrees to 74 degrees C (-20 degrees to 165 degrees F) (relative humidity >80%)
Denumiri similare la Microfon Shure SM86: SM 86
![]()
A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The built-in three-point shock mount minimizes handling noise, and a two-stage pop filter reduces wind and breath \\"pop\\" noise.
- SM86-LC: Cable not included.
- Condenser cartridge for studio quality sound
- Tailored frequency response for a clear reproduction of vocals
- Rugged construction withstands the rigors of touring sound
- Cardioid polar pattern minimizes unwanted background noise
- Excellent choice for stage monitors and personal monitors
- Built-in three-point shock mount minimizes handling noise
- Two-stage \\"pop\\" filter reduces wind and breath noise
Date tehnice: Transducer Type Condenser (electret bias) Frequency Response 50 to 18,000 Hz Polar Pattern Cardioid Output Impedance 150 Ohms at 1 kHz Recommended minimum load impedance: 600 Ohms Sensitivity (at 1,000 Hz) Open Circuit Voltage: -50 dBV/Pa (3.15 mV) (1 Pa = 94 dB SPL) Output Clipping Level 1000 Ohm Load at 1,000 Hz: +3 dBV (1.41 V) Maximum SPL (at 1,000 Hz) 1000 ohm load (1% THD): 147 dB Self-Noise 23 dB typical, A-weighted Dynamic Range (1000 ohms) 124 dB (maximum SPL to A-weighted noise level Signal-to-Noise Ratio 71 dB at 94 dB SPL (IEC 651)* *S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted. Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector. Power Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3 Current Drain: 5.2 mA Connector Three-pin (XLR) professional audio Case Dark gray enamel-painted steel with matte-finished silver colored steel grille Dimensions See User Guide Net Weight Net: 278 grams (9.8 oz) Environmental Conditions Operating: -18 degrees to 60 degrees C (0 degrees to 135 degrees F) (relative humidity >90%) Storage: -29 degrees to 74 degrees C (-20 degrees to 165 degrees F) (relative humidity >80%)
Denumiri similare la Microfon Shure SM86: SM 86
Galerie
Prețurile și informațiile de pe paginile noastre sunt furnizate de magazinele partenere și au caracter informativ, unele erori pot apărea. Imaginile produselor au caracter informativ, uneori pot include niște accesorii care nu sunt mereu incluse în pachetul de baza. Informațiile aferente produsului (imagine, descriere, preț) se pot schimba fără notificare prealabilă. Compari.ro nu își asumă responsabilitate pentru eventualele greșeli.
