The most accessible wireless Shure vocal microphone for elevating sound quality combined with  simple setup and an intuitive interface for performance you can trust in. With rack-mount receiver. A rugged mic tuned to accentuate the clarity of lead and backup vocals with rack-mount analog transmission. What is the PG58 best suited to? The PG58 has been tuned specifically for vocal applications and is mainly used by amateur/semi-pro lead and backup vocal artists with some experience in live performance. What receiver comes with the PG Wireless Rack-mount Vocal System? The PG Wireless Rack-mount Vocal System comes with the Analog Wireless Rack-mount Receiver BLX4R that provides improved linearity and frequency response. The receiver BLX4R is ready to perform right out of the box and is the clearest choice for performers who wish to unplug from the wire. Is a rack mount kit included Yes, the box contains everything you need for rack mounting. How many musicians can use this system simultaneously? Up to 12 compatible channels per group with group and channel scan for easy set-up. Is the setup really that easy? Yes, with one button you can start the group and channel scan, which gives you the best open frequency. Adjust the transmitter to the same channel and you’re ready to go. What does Linearity mean? The proportion between input signal of the transmitter and output signal of the receiver is always constant. How does the BLX receiver perform compared to wired? The frequency response of the wireless microphone is almost identical to the frequency response of a wired mic. Also the dynamic performance is almost the same. What’s the difference between the old and the new PG Wireless System? With the old PG Wireless System PG is the name for the microphones as well as for the receivers. With the new system, the name PG stands for the whole line of microphones in differentiation to SM and Beta microphones. The receivers name is BLX. This receiver is also part of SM and Beta Wireless Systems. The new PG Wireless Systems come with the Analog Wireless Receivers that provide improved linearity and frequency response as well as up to 12 compatible channels per group with group and channel scan for easy set-up. Entry point to professional Shure quality, ruggedness and sound. PG58 Vocal Microphone

• Tailored frequency response This is the range of frequencies, from the lowest to the highest, that a mic can pick up. Read more Go to the glossaryis smooth and extended. Tuned specifically for vocal applications.
• Cardioidpolar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings.
• Dynamic cartridge has a simple, rugged coil. Handles extreme volume levels without distortion.
• Cartridge includes a neodymium magnet for high output level.
• Internal shock mount for reduced handling noise.
• Durable metal construction.
• On/off switch for onstage control.
• Hardened steel mesh ball grille that resists wear and abuse.
• Integral "pop" filter reduces explosive breath sounds and wind noise.
• Includes 15ft. (4.57m) cable, break-resistant mic clip and storage bag.

BLX2 Handheld Transmitter

• Power and battery status LED
• Adjustable gain control
• Quick and easy frequency matching
• AA batteries (included) provide up to 14 hours of continuous use
• 100 m (300 ft. ) operating range (line of sight)

Receiver BLX4R

• One-touch QuickScan frequency selection quickly locates the best open frequency (in case of interference)
• Up to 12 compatible systems per frequency band (region-dependent)
• XLR and ¼ output connectors
• Two-color audio status indicator LED    
  
  • Green:  Normal audio levels
  • Red:  Excessive audio levels (overload/clipping)
• Adjustable output level 
• Removable antennas for quick antenna distribution
• LC Display with detailed RF and audio metering
• Rack mount kit included

Furnished Accessories

• RACK MOUNT BRACKET, part number: 53A8611
• LONG RACK MOUNT BRACKET, part number: 53A8612
• LINK BRACKET, part number: 53B8443
• HARDWARE KIT, part number: 90AZ8100
• Swivel adater, part number: 90F4046
• Thread adapter, part number: 31B1856
• 2x, ANTENNA/BNC, 1/4 WAVE, part number: 95A8699 
• 2x, ADAPTER, BULKHEAD, BNC, part number: 95A8994
• BAG  VINYL, ZIPPERED, part number: 95B2313
• 2x, CABLE, BNC, 22 in. , part number: 95K2035
• Power supply PS23

Specs:                          System technical specifications

• Compatible systems per frequency This is how many times a sound or radio wave oscillates in one second. Read more Go to the glossaryband (up to): 12
• Selectable frequencies: Up to 150
• Auto Setup Features: QuickScan : Finds group with most compatible frequencies and sets to best frequency
• Audio Reference Companding: No
• Included Antennas: BLX4, BLX88: Internal, BLX4R: Detachable
• Antenna Options: No
• Receiver Network Ability: No
• PC Control: No
• Rack Hardware: URT2 (not included), Rack mount brackets (only with rackable/BLX-R Sets)
• Case: No
• Transmitter Display: LED
• Receiver Display: BLX4, BLX88: LED, BLX4R: High-resolution LCD screen
• Battery, Endurance: 2AA, up to 14h
• Environment: Small to medium stages

Further Technical Specs

• Operating Range: 91 m ( line of sight - actual range depends on RF signal absorption, reflection and interference)
• Available Frequencies: Between 524–865 MHz (available frequencies depend on applicable regulations in country where system used)
• Audio Range: 50–15,000 Hz (dependent on microphone type)
• Transmitter RF Output Power: 10 mW, typical (varies by region)
• Audio Output Connector: XLR and 1/4" (6.3 mm)  unbalanced Maximum Output Level: -27 dBV (XLR, mic level), -13 dBV (1/4")
• Battery Life: Up to 14 hours
• Dynamic Range: 100 dB A-weighted
• System Distortion: 0.5% THD typical (ref. +/- 38 kHz deviation,  1 kHz tone)
• Operating Temperature Range: -18°C (0°F) – +50°C (122°F)
• Power Requirements: BLX1, BLX2: 2 AA alkaline or rechargeable batteries
• BLX4R: 12–15 V DC @ 260 mA, supplied by external power supply (tip positive)

Component Specifications:BLX4R Receiver

• Output Impedance:
• - XLR connector: 200 O
• - 6.35 mm (1/4") connector: 50 O
• Audio Output Level, Ref. ±33 kHz deviation with 1 kHz tone:
• - XLR connector: –20.5 dBV (into 100 kO load)
• - 6.35 mm (1/4") connector: –13 dBV (into 100 kO load)
• RF Sensitivity: -105 dBm for 12 dB SINAD, typical
• Image Rejection: >50 dB, typical
• Dimensions: 50 mm X 198 mm X 163 mm H x W x D
• Weight, without antennas: 998 g
• Housing: Molded ABS, steel
• Power Requirements: 12–15 V DC @ 260 mA, supplied by external power supply (tip positive)

BLX2 Handheld Transmitter

• Audio Input Level    
  
  • - gain 0dB: -20 dBV maximum
  • - gain -10dB: -10 dBV maximum
• Gain Adjustment Range: 10 dB
• RF Transmitter Output: 10 mW, typical, varies by region
• Dimensions: 224 mm X 53 mm dia.
• Weight: 218 g (without batteries)
• Housing: Molded ABS
• Power Requirements: 2 LR6 AA batteries, 1.5 V, alkaline
• Battery Life: up to 14 hours (alkaline)

                       Downloads:                                      
User Guides

• PG, SM, Beta Wireless Systems User Guide: Rackable Receiver BLX-R and BLX Transmitters, multilingual (PDF 5.631 kB)

Frequency Versions:                             
Contact the distributor in your country for specific frequency information.

• Shure Distributors

 
Date tehnice: System technical specifications

• Compatible systems per frequency band (up to): 12
• Selectable frequencies: Up to 150
• Auto Setup Features: QuickScan : Finds group with most compatible frequencies and sets to best frequency
• Audio Reference Companding: No
• Included Antennas: BLX4, BLX88: Internal, BLX4R: Detachable
• Antenna Options: No
• Receiver Network Ability: No
• PC Control: No
• Rack Hardware: URT2 (not included), Rack mount brackets (only with rackable/BLX-R Sets)
• Case: No
• Transmitter Display: LED
• Receiver Display: BLX4, BLX88: LED, BLX4R: High-resolution LCD screen
• Battery, Endurance: 2AA, up to 14h
• Environment: Small to medium stages

Further Technical Specs

• Operating Range: 91 m ( line of sight - actual range depends on RF signal absorption, reflection and interference)
• Available Frequencies: Between 524–865 MHz (available frequencies depend on applicable regulations in country where system used)
• Audio Range: 50–15,000 Hz (dependent on microphone type)
• Transmitter RF Output Power: 10 mW, typical (varies by region)
• Audio Output Connector: XLR and 1/4" (6.3 mm)  unbalanced Maximum Output Level: -27 dBV (XLR, mic level), -13 dBV (1/4")
• Battery Life: Up to 14 hours
• Dynamic Range: 100 dB A-weighted
• System Distortion: 0.5% THD typical (ref. +/- 38 kHz deviation,  1 kHz tone)
• Operating Temperature Range: -18°C (0°F) – +50°C (122°F)
• Power Requirements: BLX1, BLX2: 2 AA alkaline or rechargeable batteries
• BLX4R: 12–15 V DC @ 260 mA, supplied by external power supply (tip positive)

Component Specifications:BLX4R Receiver

• Output Impedance:
• - XLR connector: 200 O
• - 6.35 mm (1/4") connector: 50 O
• Audio Output Level, Ref. ±33 kHz deviation with 1 kHz tone:
• - XLR connector: –20.5 dBV (into 100 kO load)
• - 6.35 mm (1/4") connector: –13 dBV (into 100 kO load)
• RF Sensitivity: -105 dBm for 12 dB SINAD, typical
• Image Rejection: >50 dB, typical
• Dimensions: 50 mm X 198 mm X 163 mm H x W x D
• Weight, without antennas: 998 g
• Housing: Molded ABS, steel
• Power Requirements: 12–15 V DC @ 260 mA, supplied by external power supply (tip positive)

BLX2 Handheld Transmitter

• Audio Input Level    
  
  • - gain 0dB: -20 dBV maximum
  • - gain -10dB: -10 dBV maximum
• Gain Adjustment Range: 10 dB
• RF Transmitter Output: 10 mW, typical, varies by region
• Dimensions: 224 mm X 53 mm dia.
• Weight: 218 g (without batteries)
• Housing: Molded ABS
• Power Requirements: 2 LR6 AA batteries, 1.5 V, alkaline
• Battery Life: up to 14 hours (alkaline)

Denumiri similare la Microfon Shure BLX24R/PG58: BLX 24 R PG 58, BLX24RPG58, BLX 24R/PG58, BLX24R/PG 58

Galerie